Menu

CheckPoint VPN configuration


VPN client configuration for a Checkpoint (NGX) firewall, I used R70 but same configuration applies to any version older then R65,

So first thing we need is to create a user for the connection,
For the password use Checkpoint password,


Next create a Group to host the users used for the VPN,
Configuring the tunnel, I used all the default settings so I only added the Gateway and the Group


Now, configure the Gateway related, first allow IPSEC VPN

Create a Certificate

And allow office mode, in other words – a DHCP for the clients.

And last thing – managing the traffic, I intended for full access to the LAN network

There are many changes to be made here, for example obtaining the users from an LDAP server or using custom rules to filter the traffic.

Hope this post was helpful, If it was please consider a donation:
BTC Address: 1CnyMpjd1RntRDxSus2hu2aDMyzL4Kj29N
LTC Address: LUqrKbzGihTU2GEnL3EwsuuLHCsxCJMdtR

1 comment:


  1. I just want to let you know that I just check out your site and I find it very interesting and informative..
    page

    ReplyDelete